Gate Valves
- Valves are manufactured in accordance with BS5150. End flanges conform to BS1560 Section 3.2/ANSI B16.1 Class 125 with flat faceand are normally supplied drilled.
- Wedge disk, non-rising stem, inside screw, bronze trim.This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC.Temperature operating range: -10 to 230ºC.
Tozen Valve
- They are suitable for both isolation and control purposes
- The light weighted and compact design reduces installation, storage and transport costs
- They can installed at any selected position
- The centrally mounted disc and hydrodynamic design minimize pressure loss
- Excellent flow characteristics with flow in either direction optimally achieved in the operating range between 15° and 70° opening
Valve - Crane Valve
Crane Valve manufactures Bronze, Iron, Steel, and Stainless Steel Gate,
Globe, and Check Valves traditionally sold for general services into
Commercial Construction (HVAC), Chemical Refining, Petroleum Refining,
Power Generating, and Pulp and Paper industries.
Valve - Apollo Valve
- Actuators & Controls
- Backflow Preventers
- Ball Valves
- Butterfly Valves
- Check Valves
- Marine
- Mixing Valves
- Pipeline Strainers
- Plumbing & Heating
- Safety Relief Valves
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> MIXER <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Top Mounted Agitators
- N-Spindle top mounted agitator built with double ball bearings, suit for heavy duties applications.
- Sealing option could be come with V seal, gland packing and mechanical seal.
Mixers and Flowmakers
- Municipal waste water treatment systems
- Sludge treatment systems
- Sewage pumping stations
- Waste water treatment plants
- Industrial processes
- Agriculture
- Biogas plants
N-Spindle- Propeller
- Hydrofoil,
- Turbine,
- Paddle,
- Rushton,
- Tee & Ribbon type
N-Spindle- Top mounted Agitators
- With/without seal (V-Ring, Gland Packing, Single & Double seal)
- Over strength in Shaft design
- Low Energy and maintenance agitation products
- Small to large tank
- Chemical mixing, pH adjustment
- Slurry settlement
- Coagulation & Flocculation
- Lime & Polymer preparation
N-Spindle- Static Mixer
- Low cost stainless steel mixer
- ½” to 6” standard size
- SUS 304, SUS 316 and SUS 316L
- Varies connection type i.e thread end, DIN/JIS 10K/ANSI 150
Static Mixer, Clear PVC
Clear PVC Static Mixers, Series 1308
- In response to a growing need for high quality PVC static mixers at a lower price, NSpindle developed the Series 1308 PVC Static Mixer. This unit is a clear PVC static mixer, which unlike other static mixers, allows for a visual inspection of the mixing process.
